您现在的位置:首页>>快速门新闻 >> 「雅安快速门」厂房堆积门红外防砸的接线和调试

「雅安快速门」厂房堆积门红外防砸的接线和调试

作者:雅安快速门定做   发布时间: 2019/8/20 8:48:06


「雅安快速门」厂房堆积门红外防砸的接线和调试



Infrared anti-smashing wiring and debugging of Ya'an Express Gate stacking doors


 



快速卷帘门简称快速门,是现代工业门的一种,由于可以快速的打开和关闭而得名,运用起来十便利,深受各界人士的喜欢。跟着产品技术的不断老练,在规划、制造以及安装周期都已大为的缩短,工作效率得以大幅度进步。



Fast curtain door, short for Fast Door, is one of the modern industrial doors. It is named for its fast opening and closing. It is convenient to use and popular with people from all walks of life. With the continuous sophistication of product technology, the planning, manufacturing and installation cycle has been greatly shortened, and the work efficiency has been greatly improved.



在安装完快速门之后,都需求进行调试和查验,检测门体工作是否顺畅,各功用按键是否正常,这关系着运用过程中的安全性和实用性,所以这一步很重要。



After installing the fast door, it is necessary to debug and check whether the door works smoothly and the function keys are normal. This is related to the security and practicability in the process of application, so this step is very important.

 

雅安快速堆积门





「雅安快速门」厂房堆积门红外防砸的接线和调试



Infrared anti-smashing wiring and debugging of Ya'an Express Gate stacking doors



在调试快速门时,具体做法如下:



When debugging the fast door, the specific methods are as follows:



一、(绝对值编码器)上下限位调试检测:门体停止状态下,按下上升按键,门体向上工作,待通过缓冲、完全间断后,判断进步高度是否满足运用方要求。



1. Upper and lower limit debugging and testing: when the door body is stopped, press the rising button, and the door body works upwards. After buffer and complete interruption, judge whether the progress height meets the user's requirements.



如不满足要求,再次进行调试;往后,按下降按键,待门体下落完全间断后,查询门体结束逗留方位是否天然得当。



If the requirement is not met, debug again; then press the drop button, and when the door body falls completely discontinuous, inquire whether the end of the stay position of the door body is natural and appropriate.



二、急停按钮功用检测:门体工作过程中,按下急停按钮,查询门体是否当即间断。若依旧正常工作,则需检查急停按钮是否失灵或损坏。



2. Function detection of emergency stop button: During the working process of the door body, press the emergency stop button to inquire whether the door body is interrupted immediately. If it still works properly, it is necessary to check whether the emergency stop button is out of order or damaged.



三、自动开启功能调试:利用车辆、人员移动来仿照实践状况,查询门体是否可以及时打开,以及是否全视点无死角信号掩盖。



3. Auto-opening function debugging: using the movement of vehicles and personnel to imitate the actual situation, inquiring whether the door body can be opened in time, and whether there is no dead angle signal masking at all viewpoints.



四、红外防砸功用调试:在门体下落过程中,堵截红外对射系统,看门体是否会及时反弹上升。



Fourth, infrared anti-smash function debugging: during the falling process of the door body, intercept the infrared counter-fire system, whether the door body will rebound and rise in time.

 

成都快速堆积门厂家




在检验过程中,要注意自身安全,防止红外系统失灵构成砸伤状况。



In the process of inspection, we should pay attention to our own safety and prevent the damage caused by the failure of infrared system.



「雅安快速门」「资阳快速门」「成都快速门」



"Ya'an Express Gate", "Ziyang Express Gate" and "Chengdu Express Gate".

 

联系我们CONTACT US
版权所有:成都龙盛门业有限公司
电话:18248288962
联系人:艾经理
全国客服:4006080090
网址:http://www.cdlsdoor.com
查看更多
电话:18248288962(媒体勿扰)    联系人:艾经理
版权所有:成都龙盛门业有限公司
百度地图 - 网站地图 -